Interpreter initialization and finalization¶

See Python Initialization Configuration for details on how to configure the interpreter prior to initialization.

Before Python initialization¶

In an application embedding Python, the Py_Initialize() function must be called before using any other Python/C API functions; with the exception of a few functions.

The following functions can be safely called before Python is initialized:

Functions that initialize the interpreter:
- Py_Initialize()
- Py_InitializeEx()
- Py_InitializeFromConfig()
- Py_BytesMain()
- Py_Main()
- the runtime pre-initialization functions covered in Python Initialization Configuration
Configuration functions:
- PyImport_AppendInittab()
- PyImport_ExtendInittab()
- PyInitFrozenExtensions()
- PyMem_SetAllocator()
- PyMem_SetupDebugHooks()
- PyObject_SetArenaAllocator()
- the configuration functions covered in Python Initialization Configuration
Informative functions:
Utilities:
- Py_DecodeLocale()
- the status reporting and utility functions covered in Python Initialization Configuration
Memory allocators:
Synchronization:
- PyMutex_Lock()
- PyMutex_Unlock()

Note

Despite their apparent similarity to some of the functions listed above, the following functions should not be called before the interpreter has been initialized: Py_EncodeLocale(), and Py_RunMain().

Initializing and finalizing the interpreter¶

void Py_Initialize()¶

Part of the Stable ABI.

Initialize the Python interpreter. In an application embedding Python, this should be called before using any other Python/C API functions; see Before Python Initialization for the few exceptions.

This initializes the table of loaded modules (sys.modules), and creates the fundamental modules builtins, __main__ and sys. It also initializes the module search path (sys.path). It does not set sys.argv; use the Python Initialization Configuration API for that. This is a no-op when called for a second time (without calling Py_FinalizeEx() first). There is no return value; it is a fatal error if the initialization fails.

Use Py_InitializeFromConfig() to customize the Python Initialization Configuration.

Note

On Windows, changes the console mode from O_TEXT to O_BINARY, which will also affect non-Python uses of the console using the C Runtime.

void Py_InitializeEx(int initsigs)¶

Part of the Stable ABI.

This function works like Py_Initialize() if initsigs is 1. If initsigs is 0, it skips initialization registration of signal handlers, which may be useful when CPython is embedded as part of a larger application.

Use Py_InitializeFromConfig() to customize the Python Initialization Configuration.

PyStatus Py_InitializeFromConfig(const PyConfig *config)¶

Initialize Python from config configuration, as described in Initialization with PyConfig.

See the Python Initialization Configuration section for details on pre-initializing the interpreter, populating the runtime configuration structure, and querying the returned status structure.

int Py_IsInitialized()¶: Part of the Stable ABI.
Return true (nonzero) when the Python interpreter has been initialized, false (zero) if not. After Py_FinalizeEx() is called, this returns false until Py_Initialize() is called again.

Changed in version 3.15: This function no longer returns true until initialization has fully completed, including import of the site module. Previously it could return true while Py_Initialize() was still running.

int Py_IsFinalizing()¶: Part of the Stable ABI since version 3.13.
Return true (non-zero) if the main Python interpreter is shutting down. Return false (zero) otherwise.

Added in version 3.13.

int Py_FinalizeEx()¶

Part of the Stable ABI since version 3.6.

Undo all initializations made by Py_Initialize() and subsequent use of Python/C API functions, and destroy all sub-interpreters (see Py_NewInterpreter() below) that were created and not yet destroyed since the last call to Py_Initialize(). This is a no-op when called for a second time (without calling Py_Initialize() again first).

Since this is the reverse of Py_Initialize(), it should be called in the same thread with the same interpreter active. That means the main thread and the main interpreter. This should never be called while Py_RunMain() is running.

Normally the return value is 0. If there were errors during finalization (flushing buffered data), -1 is returned.

Note that Python will do a best effort at freeing all memory allocated by the Python interpreter. Therefore, any C-Extension should make sure to correctly clean up all of the previously allocated PyObjects before using them in subsequent calls to Py_Initialize(). Otherwise it could introduce vulnerabilities and incorrect behavior.

This function is provided for a number of reasons. An embedding application might want to restart Python without having to restart the application itself. An application that has loaded the Python interpreter from a dynamically loadable library (or DLL) might want to free all memory allocated by Python before unloading the DLL. During a hunt for memory leaks in an application a developer might want to free all memory allocated by Python before exiting from the application.

Bugs and caveats: The destruction of modules and objects in modules is done in random order; this may cause destructors (__del__() methods) to fail when they depend on other objects (even functions) or modules. Dynamically loaded extension modules loaded by Python are not unloaded. Small amounts of memory allocated by the Python interpreter may not be freed (if you find a leak, please report it). Memory tied up in circular references between objects is not freed. Interned strings will all be deallocated regardless of their reference count. Some memory allocated by extension modules may not be freed. Some extensions may not work properly if their initialization routine is called more than once; this can happen if an application calls Py_Initialize() and Py_FinalizeEx() more than once. Py_FinalizeEx() must not be called recursively from within itself. Therefore, it must not be called by any code that may be run as part of the interpreter shutdown process, such as atexit handlers, object finalizers, or any code that may be run while flushing the stdout and stderr files.

Raises an auditing event cpython._PySys_ClearAuditHooks with no arguments.

Added in version 3.6.

void Py_Finalize()¶: Part of the Stable ABI.
This is a backwards-compatible version of Py_FinalizeEx() that disregards the return value.

int Py_BytesMain(int argc, char **argv)¶: Part of the Stable ABI since version 3.8.
Similar to Py_Main() but argv is an array of bytes strings, allowing the calling application to delegate the text decoding step to the CPython runtime.

Added in version 3.8.

int Py_Main(int argc, wchar_t **argv)¶

Part of the Stable ABI.

The main program for the standard interpreter, encapsulating a full initialization/finalization cycle, as well as additional behaviour to implement reading configurations settings from the environment and command line, and then executing __main__ in accordance with Command line.

This is made available for programs which wish to support the full CPython command line interface, rather than just embedding a Python runtime in a larger application.

The argc and argv parameters are similar to those which are passed to a C program’s main() function, except that the argv entries are first converted to wchar_t using Py_DecodeLocale(). It is also important to note that the argument list entries may be modified to point to strings other than those passed in (however, the contents of the strings pointed to by the argument list are not modified).

The return value is 2 if the argument list does not represent a valid Python command line, and otherwise the same as Py_RunMain().

In terms of the CPython runtime configuration APIs documented in the runtime configuration section (and without accounting for error handling), Py_Main is approximately equivalent to:

PyConfig config;
PyConfig_InitPythonConfig(&config);
PyConfig_SetArgv(&config, argc, argv);
Py_InitializeFromConfig(&config);
PyConfig_Clear(&config);

Py_RunMain();

In normal usage, an embedding application will call this function instead of calling Py_Initialize(), Py_InitializeEx() or Py_InitializeFromConfig() directly, and all settings will be applied as described elsewhere in this documentation. If this function is instead called after a preceding runtime initialization API call, then exactly which environmental and command line configuration settings will be updated is version dependent (as it depends on which settings correctly support being modified after they have already been set once when the runtime was first initialized).

int Py_RunMain(void)¶

Executes the main module in a fully configured CPython runtime.

Executes the command (PyConfig.run_command), the script (PyConfig.run_filename) or the module (PyConfig.run_module) specified on the command line or in the configuration. If none of these values are set, runs the interactive Python prompt (REPL) using the __main__ module’s global namespace.

If PyConfig.inspect is not set (the default), the return value will be 0 if the interpreter exits normally (that is, without raising an exception), the exit status of an unhandled SystemExit, or 1 for any other unhandled exception.

If PyConfig.inspect is set (such as when the -i option is used), rather than returning when the interpreter exits, execution will instead resume in an interactive Python prompt (REPL) using the __main__ module’s global namespace. If the interpreter exited with an exception, it is immediately raised in the REPL session. The function return value is then determined by the way the REPL session terminates: 0, 1, or the status of a SystemExit, as specified above.

This function always finalizes the Python interpreter before it returns.

See Python Configuration for an example of a customized Python that always runs in isolated mode using Py_RunMain().

int PyUnstable_AtExit(PyInterpreterState *interp, void (*func)(void*), void *data)¶

This is Unstable API. It may change without warning in minor releases.

Register an atexit callback for the target interpreter interp. This is similar to Py_AtExit(), but takes an explicit interpreter and data pointer for the callback.

There must be an attached thread state for interp.

Added in version 3.13.

Cautions regarding interpreter finalization¶

In the late stage of interpreter shutdown, after attempting to wait for non-daemon threads to exit (though this can be interrupted by KeyboardInterrupt) and running the atexit functions, the runtime is marked as finalizing, meaning that Py_IsFinalizing() and sys.is_finalizing() return true. At this point, only the finalization thread (the thread that initiated finalization; this is typically the main thread) is allowed to attach a thread state.

Other threads that attempt to attach during finalization, either explicitly (such as via PyThreadState_Ensure() or Py_END_ALLOW_THREADS) or implicitly (such as in-between bytecode instructions), will enter a permanently blocked state. Generally, this is harmless, but this can result in deadlocks. For example, a thread may be permanently blocked while holding a lock, meaning that the finalization thread can never acquire that lock.

Prior to CPython 3.13, the thread would exit instead of hanging, which led to other issues (see the warning note at PyThread_exit_thread()).

Gross? Yes. Starting in Python 3.15, there are a number of C APIs that make it possible to avoid these issues by temporarily preventing finalization:

Interpreter views¶

In some cases, it may be necessary to access an interpreter that may have been deleted. This can be done using interpreter views.

type PyInterpreterView¶

Part of the Stable ABI (as an opaque struct) since version 3.15.

An opaque view of an interpreter.

This is a thread-safe way to access an interpreter that may have be finalizing or already destroyed.

Added in version 3.15.

PyInterpreterView *PyInterpreterView_FromCurrent(void)¶

Part of the Stable ABI since version 3.15.

Create a view to the current interpreter.

This function is generally meant to be used alongside PyInterpreterGuard_FromView() or PyThreadState_EnsureFromView().

On success, this function returns a view to the current interpreter; on failure, it returns NULL with an exception set.

The caller must hold an attached thread state.

Added in version 3.15.

void PyInterpreterView_Close(PyInterpreterView *view)¶

Part of the Stable ABI since version 3.15.

Close an interpreter view.

If an interpreter view is never closed, the view’s memory will never be freed, but there are no other consequences. (In contrast, forgetting to close a guard will infinitely hang the main thread during finalization.)

This function cannot fail, and the caller doesn’t need to hold an attached thread state.

Added in version 3.15.

PyInterpreterView *PyInterpreterView_FromMain(void)¶

Part of the Stable ABI since version 3.15.

Create a view for the main interpreter (the first and default interpreter in a Python process; see PyInterpreterState_Main()).

On success, this function returns a view to the main interpreter; on failure, it returns NULL without an exception set. Failure indicates that the process is out of memory.

Use this function when an interpreter pointer or view cannot be supplied by the caller, such as when a native threading library does not provide a void *arg parameter that could carry a PyInterpreterGuard or PyInterpreterView. In code that supports subinterpreters, prefer PyInterpreterView_FromCurrent() so the guard tracks the calling interpreter rather than the main one.

The caller does not need to hold an attached thread state.

Added in version 3.15.

Process-wide parameters¶

const char *Py_GetVersion()¶

Part of the Stable ABI.

Return the version of this Python interpreter. This is a string that looks something like

"3.0a5+ (py3k:63103M, May 12 2008, 00:53:55) \n[GCC 4.2.3]"

The first word (up to the first space character) is the current Python version; the first characters are the major and minor version separated by a period. The returned string points into static storage; the caller should not modify its value. The value is available to Python code as sys.version.

Interpreter initialization and finalization¶

Before Python initialization¶

Initializing and finalizing the interpreter¶

Cautions regarding interpreter finalization¶

Interpreter views¶

Process-wide parameters¶

Table of Contents

Previous topic

Next topic

This page